Conversion tool kit for Samyang 7.5mm with Canon EF-M Mount (F6226)
Conversion tool kit for Samyang 7.5mm with Canon EF-M Mount (F6226)

Conversion tool kit for Samyang 7.5mm with Canon EF-M Mount (F6226)

-15% de Descuento

127,25     108,16 €+ IVA

130,87 € IVA incluido

REFERENCIA: F6226

EAN: 641378085505

A217

24 h
 24 h. 1 unidad en stock
stock en tiempo real

Marca: Nodal Ninja

Price reduced from $150.  Samyang 7.5mm F3.5 fisheye is a sharp full frame (180 degree diagonal angle of view) fisheye, originally made for Micro Four Thirds (M43) system. It requires 5-6 shots around plus top and bottom shots to complete a spherical panorama. It is found that when adapted to a camera with APS-C (larger) sensor, it will give a 180 degree coverage along the width of image sensor with high sensor area utilization and high image quality. Only 4 shots around are necessary to complete a spherical panorama. It is very small and light-weight. Together with a matching pano head such as Nodal Ninja R1 and R10, it is the ideal portable set up for making quick single row spherical panorama.

Due to small differences in flange distances between M43 and target cameras, a good adapter is not possible. Besides, the original lens hood will also need to be "shaved" to remove blockage of the lens angle of view. In the spirit of "We Try Harder", Fanotec offers an easy to use complete conversion tool kit for Canon EF-M Mount.

 

This kit includes

  • Samyang 7.5mm replacement mount (Canon EF-M Mount) with rear cap
  • replacement hood with removal tool
  • LF-3 lens foot and LRP35S lens plate with lens release lever / LRP35 lens plate *
  • assorted tools for easy conversion

The replacement mount allows the lens foot to be installed at positions so that the camera sensor is either portrait, landscape or with diagonal aligned vertically.

* When the lens plate is installed at the left of lens mount (recommended position for use on R1/10/20), lens release button is blocked. LRP35S lens plate with lens release lever is made to solve this issue. For use on a multi-row pano head, the lens plate is usually installed at the bottom of lens mount and will not block the lens release button. Therefore kit with regular LRP35 is also provided at a lower cost. Note that NPP settings are different for these 2 options.

Lens Ring Plate Selection: LRP35S + Lens Release Lever For R1/R10/ R20

Settings:

4 Shots Around

R1 Setting for Samyang 7.5mm EF-M mount converted with LF-3 and LRP35S

0 deg LRP value 1.7

5 deg LRP value 1.1

7.5 deg LRP value 0.85


4 Shots Around

R10/20 Setting for Samyang 7.5mm E mount converted with LF-3 and LRP35S

7.5 deg LRP value 0.4, use the line 1cm apart to read the value at 1.4

Productos Relacionados

-15%

Lens Ring V2 for Canon 8-15mm V2 F6403

126,55     107,57 €+ IVA

24 h
 24 h. 4 unidades en stock
stock en tiempo real
-15%

Lens Ring for Samyang 8mm F2.8 Fisheye I and II (Canon EF-M) (F6526)

129,95     110,46 €+ IVA

24 h
 24 h. 1 unidad en stock
stock en tiempo real
-15%

Lens Ring for Sigma 10mm F2.8 Fisheye (A-Mount / F-Mount / K-Mount) (F6212)

106,55     90,57 €+ IVA

24 h
 24 h. 1 unidad en stock
stock en tiempo real
Los pedidos realizados antes de las 19:30 de un día hábil, se entregarán según el servicio contratado.